亚洲免费无码真人在线

TAIXING PETROLEUM MACHINERY CO., LTD.

88, Chezhan Rd., Taixing City, Jiangsu Province, 225401, P.R. China

Tel/Fax: 86-523-87684345 Mobil: 15961036326 Email: yrs71@163.com

Send us email

CNPC SINOPEC CNOOC API

A reliable supplier for drill pipe elevator, casing elevator, drill collar elevator, tubing elevator, slip type elevator, single joint elevator, sucker rod elevator, elevator links, perfection links, safety clamps, tubing spider and hose loops, swivel joints, pup joints, plug valves

About Us

API Licenses

Quality Control

Contact Us

Sucker rod elevator

Sucker rod elevator is designed and manufactured in line with API Spec 8C Specification for Drilling and Production Hoisting Equipment, Sucker Rod Elevators are reversible type elevators to handle sucker rods in oil extraction or work-over operation, these sucker rod elevators are equipped with easy operating front and rear latches to ensure that sucker rods can be released quickly and easily, by thumb and finger press alone, at either the front or rear of the body, sucker rod elevators solid bodies are cast from high quality alloy steel and bails are forged integrally from high quality alloy steel to ensure long service life, elevator body is fully heat-treated, bodies of sucker rod elevators are machined to close tolerance and suitable for handling sucker rods size range from ⅝" to 1¼" and the rated load are 15ton and 25ton. Sucker rod elevators can handle hollow type sucker rod and will not bend or kink sucker rods under heavy load. Bodies of sucker rod elevators are reversible to ensure that two sides of elevator body can bear load. Sucker rod elevators bear API monogram as per API requirements, and marked with size, rated working capacity on and product series nos sucker rod elevator bodies to tracing, warranty of sucker rod elevators is 12 months from being in field service or 18 month from being dispatched.

Technical data of sucker rod elevators are as follows:

Specification

Elevator Bore Dimension

(mm)

Suck Rod Size

(in)

Rating Load

ton

CDQ(S) 19/(load)

19

½

15

25

CDQ(S) 23/(   )

23

¾

CDQ(S) 26/(   )

26

¾

CDQ(S) 30/(   )

30

⅞-1

CDQ(S) 33/(   )

33

1⅛

CDQ(S) 36/(   )

36

sucker rod elevator

Sucker rod elevator product photo

Configuration and Description of sucker rod elevator

sucker rod elevator configuration

Description of each item

S.N.

Description

Qty

1

Body

1

2

Bail

1

3

Front latch

2

4

Rear latch

2

5

Pin

4

6

Spring

2

Operation
Sucker rod elevator hangs from the sucker rod hook, which is attached to the traveling block or the service or drilling rig. The drawworks of the rig move the elevator up and down the rigs derrick to install and remove sucker rod. The elevator may also be used on or around the rig floor for handling sucker rod.
To attach the elevator to the sucker rod, the elevator operator stands on one side of the sucker rod with the elevator on the opposite side. The operator reaches around the sucker rod with one hand on either side of the sucker rod. The elevator is gripped by the bail, and the operator pulls the elevator to the sucker rod, so that the sucker rod is automatically latched in the center of the elevator. It is important for the elevator operator to visually verify that the sucker rod is completely inside the elevator and that the latch retainers are in place, or premature release of the sucker rod could occur resulting in bodily injury and/or dropping the sucker rod down the well requiring fishing of the dropped sucker rod string.

Elevator Inspection
Visually inspected sucker rod elevator on a daily basis for corrosion and damaged components and remove all external dirt and grease daily. Examine sucker rod elevator bail for deformation. Not to use sucker rod elevator with excess wear of ⅛". Test the operation of the elevator latch mechanism daily. Not to grind or remove metal from any surface of the elevator.
Inspect daily for any visual evidence of external cracks. If visible cracks that indicate potential failure appear. Then remove sucker rod elevator immediately from service.
Grease pins to maintain smooth operation.

Magnetic particle inspect sucker rod elevator body on an annual basis for indications of cracking

The information of our products listed in this website is provided in line with API Specifications and China's National Standards, description for any product can help readers make their own decisions.

For any comments, please contact us at yrs71@163.com

Copyright (C) 2008 Taixing Petroleum Machinery Co., Ltd.  All rights reserved (Register No. SU ICP 08100726)

亚洲免费无码真人在线